Editing The Configuration File - Motorola CS3000 Manual

1 - 26 CS3000 Series Scanner Product Reference Guide

Editing the Configuration File

Use a text editor such as Notepad to set configuration values in the
folder on the CS30XX.
\Parameters
NOTE If you make errors while editing the Config.ini file, the file LOG.TXT is created in the \Parameters folder.
Consult this log file to determine the errors and make corrections.
Config.ini File Content
Table 1-1
Parameter
BarcodeFile
BarcodeDB
BTPin
BTName
BTProfile
Mute
Prefix
Suffix
Separator
DateFormat
TimeFormat
Table 1-1 lists the programmable contents of the file.
Values
String In batch mode, the name of the batch file
containing bar codes scanned.
String Bar code database filename. If the
database file exists scanned bar codes are
checked against its content. If the bar
code exists within the database, the
scanner issues a positive beep, if not a
negative beep. To engage this mode,
create the BarcodeDB.txt file on the
CS30XX. Note that if this mode is
engaged, no bar code data is saved to the
scanner.
String Default SPP PIN.
String Bluetooth device name (address) used
during discovery.
HID Selected BT profile.
SPP
On Mute the beeper.
Off
Character Prefix character.
Character Suffix character.
Character Separator character.
MM/DD/YY Date format for batch data. Set to enable
DD/MM/YY
date stamp
MM/DD/YYYY set the date.
DD/MM/YYYY
Enter no value to disable the date stamp,
for example: "
12h Time format for batch data. Set to enable
24h
time stamp
set the time.
Enter no value to disable the time stamp,
for example: "
editable text file in the
Config.ini
Description
. See Set Date on page 3-5
"
DateFormat =
. See Set Time on page 3-5
"
TimeFormat =
Default
BARCODES.TXT
DBASE.TXT
1234
CS3070:<serial
number>
HID
Off
<none>
0x0D (CR)
','
MM/DD/YY
to (Enabled)
24h
to (Enabled)