User Preferences; Set Default Parameter - Motorola DS9208-1D Product Reference Manual

4 - 4 DS9208-1D Product Reference Guide

User Preferences

Set Default Parameter

You can reset the digital scanner to two types of defaults: factory defaults or custom defaults. Scan the
appropriate bar code below to reset the digital scanner to its default settings and/or set its current settings as
custom defaults.
•
Set Defaults - Scan this bar code to reset all default parameters as follows.
• If you previously set custom defaults by scanning Write to Custom Defaults, scan Set Defaults to
retrieve and restore the digital scanner's custom default settings.
• If you did not set custom defaults, scan Set Defaults to restore the factory default values listed in
Table A-1.
•
Set Factory Defaults - Scan this bar code to restore the factory default values listed in
deletes any custom defaults set.
•
Write to Custom Defaults - Scan this bar code to set the current digital scanner settings as custom
defaults. Once set, you can recover custom default settings by scanning Set Defaults.
*Set Defaults
Write to Custom Defaults
Table A-1.
Set Factory Defaults
This