Advanced - Lan Configuration - Kontron KTQ77/Flex User Manual

KTD-N0848-B

10.2.16 Advanced - LAN Configuration

Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Advanced
LAN Configuration
System UUID {f4af2da3-b59d-58a9-466cb11a02b0486f}
ETH1 Configuration (Left)
Wake on LAN
MAC Address & Link status:
ETH2 Configuration (Upper)
MAC Address & Link status:
ETH3 Configuration (Lower)
MAC Address & Link status:
Network Stack
►
Version 2.15.1236. Copyright © 2012 American Megatrends, Inc
Function
ETH1 Configuration (Left)
Wake on LAN
ETH2 Configuration
(Upper)
ETH3 Configuration
(Lower)
Page 99
[Enabled]
[Enabled]
00E0F4288EA3+
[Enabled]
00E0F4288EA4-
[Enabled]
00E0F4288EA5-
Selection
Disabled
Enabled
With PXE boot
Enabled
Disabled
Disabled
Enabled
With PXE boot
Disabled
Enabled
With PXE boot
BIOS - Advanced
Control of Ethernet Devices and
PXE boot. To disable ETH1, ME
Subsystem must be as well.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Description
Control of Ethernet Devices and PXE boot. To
disable ETH1, ME Subsystem must be as well.
Enable or disable integrated LAN to wake the
system. (The Wake On LAN cannot be disabled
if ME is on at Sx state.)
Control of Ethernet Devices and PXE boot. To
disable ETH2, ME Subsystem must be as well.
Control of Ethernet Devices and PXE boot. To
disable ETH3, ME Subsystem must be as well.
KTQ77/Flex Users Guide