Kontron KTQ77/Flex User Manual page 105

KTD-N0848-B
When "Serial Port for Out-of-Band Management/Windows Emergency Management Services (EMS)" >
"Console Redirection" is enabled:
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Advanced
Out-of-Band Mgmt Port
Terminal Type
Bits per second
Flow Control
Data Bits
Parity
Stop Bits
Version 2.15.1236. Copyright © 2012 American Megatrends, Inc
Function
Out-of-Band Mgmt Port
Terminal Type
Bits per second
Flow Control
Page 105
[COM0]
[VT-UTF8]
[115200]
[None]
8
None
1
Selection
COM0
COM1
COM2
COM3
COM4
VT100
VT100+
VT-UTF8
ANSI
9600
19200
57600
115200
None
Hardware RTS/CTS
Software Xon/Xoff
BIOS - Advanced
Microsoft Windows Emergency
Management Services (EMS)
allows for remote management
of a Windows Server OS
through a serial port.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Description
Microsoft Windows Emergency Management
Services (EMS) allows for remote management
of a Windows Server OS through a serial port.
VT-UTF8 is the preferred terminal type for out-
of-band management. The next best choice is
VT100+ and then VT100. See above, in
Console Redirection Settings page, for more
Help with Terminal Type/Emulation.
Select serial port transmission speed. The
speed must be matched on the other side. Long
or noisy lines may require lower speeds.
Flow control can prevent data loss from buffer
overflow. When sending data, if the receiving
buffers are full, a ´stop´ signal can be sent to
stop the data flow. Once the buffers are empty,
a ´start 'signal can be sent to re-start the flow.
Hardware flow control uses two wires to send
start/stop signals.
KTQ77/Flex Users Guide