Kontron KTQ77/Flex User Manual page 13

KTD-N0848-B
Hardware
• Smart Fan control system, support Thermal® and Speed® cruise for FAN_CPU
Monitor
• CPU die temperature input (Precision +/- 3ºC)
Subsystem
• Voltage monitoring
• Intrusion (Case Open) detect input, (via Feature connector)
• Sleep S4/S5# Indication, (via Feature connector)
• System Powergood Signal, (via Feature connector)
Power ATX/BTX (w. ATX+12V) PSU for full PCI/PCIe load.
Supply Unit
Battery
Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 5 years retention.
Current draw is 5,7µA when PSU is disconnected and 0 µA in S0 – S5.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
BIOS
• Kontron Technology / AMI BIOS (EFI core version)
• Support for ACPI 3.0 ( Advanced Configuration and Power Interface), Plug & Play
o
o
o
• "Always On" BIOS power setting
• RAID Support (RAID modes 0,1, 5 and 10)
Operating
• WinXP (32b *)
Systems
• Windows 7 (32b + 64b *)
Support
• WES7 (32b * + 64b *)
• Linux Fedora *
• Linux Ubuntu * (RAID problem)
• VxWorks BSP, WES7 BSP, Kontron Linux BSP (not ready yet)
*= Out Of The Box installation test only
Page 13
Suspend (S1 mode)
Suspend To Ram (S3 mode)
Suspend To Disk (S4 mode)
System Specification
KTQ77/Flex Users Guide