Smdr Rs-232C Communication Parameters - Panasonic KX-TA308 Installation Manual

4.2 System Programming

[800] SMDR RS-232C Communication Parameters

Assigns the communication parameters for the Serial Interface (RS-232C).
NL–Code:
(New line)
Baud Rate:
Word Length: The word length code indicates how many bits compose a character.
Parity:
Stop Bit:
8
< Sets the word length >
NEXT
* 1 CR+LF (Carriage Return + Line Feed) / CR (Carriage Return)
* Select "None" when the error checking function is not required from the printer.
2
Default
• To return to the previous mode, press
!
!
• The following combinations are invalid.
If any of the above invalid combinations are selected, an alarm tone is heard.
• Feature Reference
Section 3, Features
Station Message Detail Recording (SMDR)
Selects the code for your printer or personal computer. If your printer or
personal computer automatically feeds lines with a carriage return, select
"CR". If not, select "CR+LF".
The baud rate code indicates the data transmission speed from the system
to the printer or personal computer.
The parity code indicates what type of parity is used to detect an error in
the string of bits composing a character. Make your selection depending
on the requirements of your printer or personal computer.
The stop bit code indicates the end of a bit string which composes a
character. Select a value depending on the requirements of your printer
or personal computer.
< Sets the new line code>
0 0
NEXT
(CR+LF/CR)*
STORE
SELECT
(7/8 bits)
New line Baud rate
CR + LF 9600 baud
Parity Word length
Mark 8
Space 8
Space 8
< Sets the baud rate >
SELECT STORE NEXT
1
< Sets the parity >
STORE
NEXT SELECT
(Mark/Space/
Even/Odd/
None* )
2
Word length
8 bits
instead of
PREV
Stop bit length
2
1
2
SELECT STORE
(150/300/600/
1200/2400/
4800/9600 B)
< Sets the stop bit length >
STORE
NEXT SELECT
(1 bit/2 bits)
Parity Stop bit length
Mark 1 bit
.
NEXT
System Programming
[800]
END
4-83