Doorphone Chime Assignment; Doorphone Chime Pattern; Smdr Rs-232C Parameter - Panasonic KX-TA824 Programming Manual

2.2 PT Programming—Procedures

[711] Doorphone Chime Assignment

Selects the relay to which a doorbell or a door chime is connected, for use when "Chime" or "Ring & Chime"
is selected in [710] Doorphone Ring/Chime.
7 1 1
Conditions
• A relay not connected to a door opener should be selected.
Programming Manual References
[710] Doorphone Ring/Chime
Feature Manual References
1.1.47 Doorbell/Door Chime
1.1.48 Doorphone Call

[712] Doorphone Chime Pattern

Selects the doorphone chime pattern for incoming doorphone calls. Chime patterns 1–4 are played only one
time during the doorphone ringing time.
7 1 2
Feature Manual References
1.1.47 Doorbell/Door Chime
1.1.48 Doorphone Call
2.2.1 Tones/Ring Tones

[800] SMDR RS-232C Parameter

Specifies the following communication parameters for the Serial Interface (RS-232C port):
a.
New Line (NL) Code: Select the code appropriate for the PC or printer. If the PC or printer
automatically feeds lines with carriage return, select "CR". If not, select "CR+LF".
b.
Baud Rate: Baud rate indicates the transmission speed of data from the PBX to the PC or printer.
c.
Word Length: Word length indicates how many bits compose each character.
68 Programming Manual
NEXT
doorphone no.
NEXT
(1 ... 4/
)
NEXT
doorphone no.
NEXT
(1 ... 4/
)
or
PREV
To continue
name*
SELECT
STORE
...
(Relay1 4)
To continue
Relay4
SELECT
or
PREV
To continue
name*
SELECT
STORE
(Pattern 1 ... 8)
To continue
Pattern 1
SELECT
END
END