Secret Speed Dialing / One-Touch Dialing Printing - Panasonic KX-TA308 Installation Manual

4.2 System Programming

[803] Secret Speed Dialing / One-Touch Dialing Printing

Selects to print or not print (on SMDR) secret dialing numbers stored in program [001]
"System Speed Dialing Entry" and/or stored in One-Touch Dialing even though they are not
displayed on the LCD.
8
Default
• Feature References
Section 3, Features
Secret Dialing, Station Message Detail Recording (SMDR)
[804] System Data Dump
Starts and stops printing the assigned data. All or a specific area of current system-
programmed data is printed out. The areas are as follows.
All Para:
System Para: Prints out all data except for the following 4 parameters.
CO Para:
Ext Para:
DSS Para:
Speed Dial:
Stop Output : Stops printing.
< To select All parameters, System parameter,
Speed dial and/or Stop output. >
8
0
3
NEXT
No printing
Prints out all data.
Prints out programs [400] through [403] and [405] through [424].
If the extension is a proprietary telephone, programs [102], [516] [600]
through [613] and [615] will be printed out. The assigned data on the PF
(Programmable Feature) buttons and CO buttons will also be printed out.
If the extension is a single line telephone, programs [102], [516] and [600]
through [614] will be printed out. The assigned Personal Speed Dialing
numbers are also printed out.
Prints out the assigned data in the DSS buttons and PF buttons on the DSS
console.
Prints out the System Speed Dialing numbers (00 through 99) and names
(16 characters max.) assigned in programs [001] and [011].
0 4
NEXT
(All/System/CO/Ext/
DSS Para/Speed Dial/
Stop Output)
SELECT STORE
(No Printing/
Printing)
STORE
SELECT
To continue
[803]-[804]
END
END
System Programming
4-85