Voice Mail Port For Kx-Tvp75/Kx-Tvp100 - Panasonic KX-TA308 Installation Manual

4.2 System Programming

[102] Voice Mail Port for KX-TVP75/KX-TVP100

Assigns the extension jack number(s) connected to a Panasonic Voice Processing System
(VPS) equipment (KX-TVP75/KX-TVP100). Only extension jacks 07, 08, 15 and 16 are
available.
1
* Extension jack number: 07, 08, 15 and/or 16 /
Default
• Feature Reference
Section 3, Features
Voice Mail Integration for KX-TVP75/KX-TVP100
[103] DTMF Integration for KX-TVP75/KX-TVP100
Enables or disables the system to send codes (DTMF signals) to the extension(s) assigned as
the Voice Mail Port in program [102] "Voice Mail Port for KX-TVP75/KX-TVP100".
These DTMF signals indicate the state of the call (busy, answered, ringing, disconnected,
etc.) in addition to the normal call tones. They also enable the Panasonic Voice Processing
System (VPS) equipment (KX-TVP75/KX-TVP100) to immediately recognize the current
state of the call and speed up the call handling.
1
Default
• The table on next page describes the codes (DTMF signals), call state and conditions for
!
!
the DTMF integration operation.
• Select "Plan 1" or "Plan 2" in program [009] "Extension Number Assignment", and select
"Enable" in this program to enable the DTMF integration.
• This feature greatly improves the performance of the Panasonic KX-TVP75/KX-TVP100:
Voice Processing Systems which have been programmed for Inband Signaling. For more
information about Inband Signaling, refer to your Voice Processing System manual.
2
0
NEXT
All 4 extension jacks – Disable
0 3
NEXT
Disable
or
NEXT
extension jack no.*
(07, 08, 15, 16/ )
SELECT
(All 4 extension jacks)
STORE
SELECT
(Enable/
Disable)
[102]-[103]
PREV
To continue
SELECT STORE
(Enable/
To continue
Disable)
END
System Programming
END
4-15