T&B&S [Roll Paper] Adjustment - Epson Stylus Pro 4000 Field Repair Manual

Stylus Pro 4000 Field Repair Guide
1. Load 17" Enhanced Matte roll paper.
2. From the Adjustment Wizard
T&B&S [Roll Paper] Adjustment
T&B&S [Roll Paper] Adjustment
for the Pro 4000, select the
Printer Component, Software Item,
T&B&S [Roll Paper].
1. Click on the Print
2. The Printer will print out this pattern, and mea-
sure the Side Margin, the Multi Sensor Left, and
the Multi Sensor Right values using the Multi
Sensor.
3. Measure the top (leading edge) margin, and
enter the value measured.
4. Measure the bottom (trailing edge) margin, and
enter the value measured.
5. Measure the side margin (home position side),
and enter the value measured.
6. Enter the Multi Sensor Left value printed on the
print out, labeled "MS Left".
7. Enter the Multi Sensor value printed on the print
out, labeled "MS Right".
8. Click the Write button.
9. Click the Finish button.
LCD Display, Printer Button
button.
4/28/05
Page 189.