Epson Stylus Pro 4000 Field Repair Manual page 95

Stylus Pro 4000 Field Repair Guide
6. Remove 2 Screws fastening the Platen Gap Motor, and remove.
7. Remove 2 Screws fastening the Gear and Shaft Assembly, and remove.
8. Slide the Cap and Pump Assembly to the right, to separate the Assembly from the Gear.
Separate the Assembly
from the Gear
Pump and Cap Removal
2 Screws
Remove the Motor
2 Screws
Printer Component, Software Item,
Remove Gear
and Shaft
Assembly.
LCD Display, Printer Button
Slide the Cap and Pump
Assembly this way.
4/28/05
Page 95.