Nozzle Bi-D Adjustment - Epson Stylus Pro 4000 Field Repair Manual

Stylus Pro 4000 Field Repair Guide
1. Load 17" Enhanced Matte roll paper.
2. From the Adjustment Wizard
Note: If none of the lines are straight, pick the line that is closest to straight, and write the value. Then
reprint and try again. Each time the patterns should be closer. Repeat again if necessary, until
there is a straight line. Pick and write that value.

Nozzle Bi-D Adjustment

Nozzle Bi-D Adjustment
for the Pro 4000, select the
Printer Component, Software Item,
Nozzle Bi-D Adjustment.
1. Click on the Print
2. The Printer will print out this pattern.
3. Inspect the pattern and identify the value that
represents the most vertically straight line. It is
possible to choose an odd number that would
represent a value between the even printed
4. Enter the value from step 3 here.
5. Click the Write button.
6. Click the Finish button.
LCD Display, Printer Button
button.
4/28/05
Page 158.