Epson Stylus Pro 4000 Quick Reference Manual
Epson Stylus Pro 4000 Quick Reference Manual

Epson Stylus Pro 4000 Quick Reference Manual

C511001ucm
Hide thumbs Also See for Stylus Pro 4000:

Advertisement

Loading Roll Paper
Loading Roll Paper
1
Slide the black paper stop off the end of
the spindle.
Note:
To use paper with a 2-inch core, remove the
gray adapters from the paper stops at each end.
See your Printer Guide for details.
2
Position the roll as shown, then slide it onto
the spindle.
3
Slide the black paper stop back onto the spindle
and insert it firmly into the end of the roll.
4
Open the roll paper cover.
5
Place the roll paper in the printer as shown. (The
gray end of the spindle goes on the right.)
6
Make sure the printer is turned on, then press the
Paper Source button until the
appears.
Caution:
To avoid feeding excess paper, make sure
you don't select
or
when you're using roll paper. .
7
Release the paper lever.
8
Hold both sides of the paper and feed it into
the slot.
9
Make sure the paper is aligned with the OTHER
mark and the vertical line next to the arrow. Then
return the paper lever to the secured position.
10
Raise the roll paper support on top of the
paper tray. Then close the roll paper cover.
icon
Caution:
from the paper path and roll it up when you're not
printing.
1
To prevent creasing the paper, remove it
Vertical line
OTHER mark

Advertisement

Table of Contents
loading

Summary of Contents for Epson Stylus Pro 4000

  • Page 1 Loading Roll Paper Loading Roll Paper Slide the black paper stop off the end of the spindle. Note: To use paper with a 2-inch core, remove the gray adapters from the paper stops at each end. See your Printer Guide for details. Position the roll as shown, then slide it onto the spindle.
  • Page 2: Loading Paper In The Tray

    Make sure the printer is on and roll paper is not loaded for printing. Caution: Heavy media or very glossy media (such as EPSON Premium Glossy Photo Paper) cannot be used with the paper tray. Pull out the paper tray and cover. Lift up the paper tray cover.
  • Page 3: Loading Paper Manually

    Note: Use the top manual feed slot for very glossy media (such as EPSON Pemium Glossy Photo Paper). Make sure the printer is turned on, then press Paper Source button until you see the cut sheet icon.
  • Page 4: Checking And Aligning The Print Head

    First, make sure paper is loaded in the tray. Go to the Utilities in your EPSON printer driver. In Mac OS X, you’ll find it in the Epson Printer Utility in the Applications folder. Click the Nozzle Check icon.
  • Page 5: Checking Ink Levels

    INK LOW is displayed on the LCD panel, the corresponding cartridge is nearly empty. Make sure you have the correct replacement cartridge. You can install any combination of 110 ml and 220 ml cartridges. EPSON UltraChrome 110 ml Photo Black T543100 Cyan...
  • Page 6: Replacing Printer Parts

    E*****F indicates a new cutter. If no stars are displayed, the cutter needs to be replaced. Caution: Do not use the cutter for the following media: • Fine art paper (such as EPSON UltraSmooth, Textured, or Velvet) • Canvas • Backlight film • Vinyl Return the ink lever to its locked position.
  • Page 7: Replacing The Maintenance Tank

    Replacing Printer Parts (continued) Replacing Printer Parts (continued) Hold down the side pin, as shown, then turn the latch to the right. Release the side pin and carefully remove the cutter blade. Insert the new cutter blade. Hold down its side pin and secure it with the latch.
  • Page 8: Control Panel Messages

    Control Panel Messages Control Panel Messages Status messages These messages indicate normal phases of printer operation. Message Light READY Pause light off PRINTING Pause light flashing RESET All lights flash briefly PRESS PAUSE BUTTON Pause light on PLEASE WAIT Pause light flashing PAUSE Pause light on CUTTING...
  • Page 9: Where To Get Help

    World Wide Web Support for non-EPSON RIP EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON UltraChrome is a trademark and EPSON Preferred is a service mark of Epson America, Inc. © 2004 by Epson America, Inc.
  • Page 10 Control Panel Lights and Buttons Control Panel Lights and Buttons Power button Pause light and button Ink light Hold for 3 seconds to cancel a print job or reset the printer. 1 2 3 4 5 6 7 8 3sec. Left arrow or Paper Source button Hold for 3 seconds...

Table of Contents