Epson Stylus Pro 4000 Field Repair Manual page 186

Stylus Pro 4000 Field Repair Guide
Note: The IEEE1394 I.D. is written on a
label, that is located in the Main
Board Cavity.
RTC & USB & IEEE1394ID Adjustment
Note: An IEEE1394 I.D. can be generated by
using the following syntax: 0001EXXXX,
where XXXX = the last 4 digits of the
Printer's serial number.
Printer Component, Software Item,
6. Verify that the Date and Time
information is correct. It can be
adjusted if necessary.
7. Enter the IEEE1394 I.D.
8. Enter the Printer's serial
number.
9. Click on the
the data to the printer.
Note: The IEEE1394 I.D. must be
entered before the Printer's
serial number, for the
ton to be activated.
LCD Display, Printer Button
4/28/05
Write button to send
Write but-
Page 186.