Starting The Unit - Lennox BAC020SNM Installation, Operating And Maintenance

COMMISSIONING

STARTING THE UNIT

At this point the unit circuit breakers should be open
You will need a DS50 maintenance controller or Climalook
with appropriate Interface.
Language  or 
ENGLISH
RT 050.001
BIOS. 0000 Boot 0000
The jumpers are factory set and the configuration switches
are adjusted depending on the option the type of unit.
Connecting the CLIMATIC displays
Close the 24V Control Circuit breakers.
The CLIMATIC 50 starts after 30s
BALTIC R410A-IOM-0708-E
Fig. 30
Fig. 31
Fig. 32
Reset the DAD photo (If fitted)
Check and adjust the control settings.
Refer to the control section in this manual to adjust the
different parameters
Fig. 33
Page 27