Specifications - Sanyo DSR-3716P Instruction Manual

2

SPECIFICATIONS

Specifications
Product name
Product number
Hard disk capacity
Television system
Compression
Picture resolution
Recording type
Picture quality
Recording rate
Recording areas
Magnification
Search modes
Date/clock settings
Date and time positions
Camera title display
Memory backup
Video input terminal
Video output terminal
Main monitor output terminal
Monitor 2 output terminal
Audio input terminal
Audio output terminal
Microphone input terminal
Video output terminal
Front AV
output
Audio output terminal
CompactFlash card slot
LAN terminal
RS-485 terminal
USB terminal
Alarm input terminals
Sensor alarm output terminals Open collector, Low level active (Max. 25 mA) (DSR-3716P: x16, DSR-3709P: x9)
Remote control input terminal Two-wire voltage control (x2)
Clock adjust input terminal
Clock adjust output terminal
Alarm output terminal
Terminals
Alarm reset input terminal
Warning output terminal
Normal recording area disk
full warning output terminal
Alarm recording area disk full
warning output terminal
Series connection input
Series connection output
External timer input terminal
Non rec output terminal
Power supply voltage
Current consumption
Allowable operating temperature
Allowable operating humidity
Dimensions
Weight
Accessory
Note that product appearance and specifications are subject to change without prior notice.
English
Digital video recorder with multiplexer function
DSR-3716P (16 channel), DSR-3709P (9 channel)
Capability for mounting 80, 160, 250, or 300 GB hard disks (sold separately)
PAL signal standard
Image: M-JPEG, Audio: WAVE
720 x 288 (fields)
Field recording
5 levels [Basic, Normal, Enhanced, Fine, Super Fine]
27 levels (50 to 0.033 FPS)
Normal recording area, Alarm recording area, Archive area
x2 digital zoom using the [ZOOM] button
Time/date search, Alarm search, Alarm thumbnail search, Archive area search, Motion detection search
Day, Month, Year (last two digits), Hours, Minutes, Seconds
2 position; upper and lower (display may also be turned off)
Each channel; up to 10 alphanumeric characters and symbols (display may also be turned off)
Approximately 30 days (for 48 hours of electrification)
VBS/VS 1.0 V (p-p), 75 Ω, BNC (DSR-3716P: x16, DSR-3709P: x9)
Through output of each video input, BNC (DSR-3716P: x16, DSR-3709P: x9)
VBS 1.0 V (p-p), 75 Ω, BNC (x1)
VBS/VS 1.0 V (p-p), 75 Ω, BNC (x1)
-8 dBs, 27 kΩ, unbalanced RCA (x1)
-8 dBs, 600 Ω, unbalanced RCA (x1)
-60 dBs, 10 kΩ, unbalanced 3.5 mm monaural pin jack (x1)
1.0 Vp-p, 75 Ω, unbalanced RCA x 1
-8 dBs, 600 Ω, unbalanced RCA x 1
CompactFlash Type 2 (front panel) (x1)
10BASE-T/100BASE-TX, RJ-45 (x1)
Compatible protocol: UDP, TCP/IP, HTTP server
RJ-11 (x2) (with a termination switch)
USB 1.1 series A terminal (x2) (front x1, rear x1)
No-volt contacts (with a pulse width of 100 ms or more) (DSR-3716P: x16, DSR-3709P: x9)
No-volt contacts (with a pulse width of 100 ms or more) (x1)
Normal 5 V DC, Low level active (x1)
Active Low, Open collector Max. 500 mA (x1)
No-volt contacts (with a pulse width of 100 ms or more) (x1)
Normal 5 V DC, Low level active (x1)
Normal 5 V DC, Low level active (x1)
Normal 5 V DC, Low level active (x1)
Normal 5 V DC, Low level active (x1)
Normal 5 V DC, Low level active (x1)
No-volt contacts (with a pulse width of 1 second or more) (x1)
Normal 5 V DC, Low level active (x1)
120 to 240 V AC, 50/60 Hz
600 mA
5 °C to 40 °C
10 % to 80 %
420 (W) x 86 (H) x 365 (D) mm
6.3 kg with a HDD, 6.9 kg with 2 HDDs
Power cord (x1), Core clamp (x1), Power cord tie (x1)
113