Table of Contents
Advertisement
6
POWER LOSS/USED TIME
Main Menu
<MAIN MENU>
1.INITIAL SET
2.RECORD SET
3.GENERAL SET
4.SCREEN SET
5.POWER LOSS/USED TIME
6.INITIALIZATION LOG
7.COPY MENU SETTINGS
MOVE:JOG
SELECT:SHUTTLE
Use the following procedure to check the date and time of
power losses, the amount of hard disk operation time, and
the amount of power-on time.
1
Press the [MENU] button and turn the
select "5. POWER LOSS/USED TIME",
and then turn the shuttle dial clockwise.
The <POWER LOSS/USED TIME> screen is displayed.
MENU
(1)
(2)
(3)
(4)
Check the date and time of power losses and the amount
of hard disk operation time.
(1) LOSS/RECOVER
Display information in sequence for the four most
recent power losses (i.e., the date and time of loss
and recovery).
The number on the left is the number of power losses
(Example: #011). For all numbers above 999, the
number "999" is displayed.
(2) DISK1 USE
Displays the total amount of running time for disk 1.
(3) DISK2 USE
Displays the total amount of running time for disk 2.
When only one hard disk is installed, "------" is
displayed.
(4) POWER
Displays the amount of power-on time for the digital
video recorder.
English
->
->
->
->
->
->
->
<POWER LOSS/USED TIME>
POWER
LOSS
RECOVER
#011
14-01 19:15 15-01 09:55
13-01 21:13 14-01 09:21
03-01 18:48 05-01 08:56
01-01 09:49 03-01 10:32
USED TIME
DISK1 USE : 00096H
DISK2 USE : -----H
POWER
: 00096H
F/W: M 0.30-00 / S 0.20-04 / C 0.09-00
[EXIT/OSD] button
[MENU] button
2
Press the [EXIT/OSD] button.
The display returns to the normal screen.
EXIT/OSD
107
Shuttle dial
CARD
CARD
MENU
RESET
EJECT
Jog dial
Advertisement
Table of Contents
