Table of Contents
Advertisement
2
VIEWING VIDEO FROM A CAMERA
Monitor 2 operation is not possible when a menu screen
is being displayed.
As the [EXIT/OSD] button is pressed, the operating
display moves to a different location or is hidden in the
same manner as the main monitor. ( P.16)
Selecting Camera No. 4 for full screen
2
Press the No. 4 [CAMERA SELECT]
button.
The video from Camera No. 4 is displayed in full screen
format on the monitor 2.
Monitor 2
01-01-04
00:00:00
04
Setting automatic full screen selection
1
Press the [SEQUENCE] button.
The video displayed on the monitor 2 changes
automatically based on camera numbers.
Press the [SEQUENCE] button once again to cancel
automatic selection.
Monitor 2
01-01-04
00:00:00
04
01-01-04
00:00:00
05
06
03
04
1
When an alarm occurs, the corresponding video is
displayed in full screen format on the monitor 2.
CARD
CARD
MENU
RESET
EJECT
Main Monitor
03
1
01
06
The MON2 indicator turns off.
07
08
09
CARD
CARD
MENU
RESET
EJECT
Main Monitor
03
01
06
07
08
09
22
If the monitor 2 is not synchronized with the connected
cameras, vertical picture instability may occur upon the
switching of camera video.
Displaying alarm video in full screen format
Set "MON.2 DISPLAY" from <ALARM
OPERATION SET> to "ON". ( P.84)
01-01-04
02
Ending the monitor 2 setting procedure
Press the [MON2] button.
MON2
Playback video cannot be viewed on the monitor 2.
00:00:00
English
Advertisement
Table of Contents
