Elapsed Recording Time Indication; Tape Remaining Time - JVC HR-DVS3U Instructions Manual

T W
1 2 3
2
4 5 6
7 8 9
0
4
1
DV S-VHS

Elapsed Recording Time Indication

1
Set the counter display.
Press DISPLAY/OSD until a counter reading appears on
the front display panel.
2
Reset the counter.
Press C.RESET before starting recording or playback.
The counter is reset to "0:00:00" and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.

Tape Remaining Time

Press DISPLAY/OSD until the time remaining on the tape
appears on the front display panel.
The front display panel shows the tape remaining time with
z
" " displayed.
By pressing the DISPLAY/OSD button, you can change the
display to show the counter reading, tape remaining time,
channel position* or clock time.
* Channel position is not displayed during playback.
NOTES:
When you press DISPLAY/OSD, the on-screen display appears
( pg. 10) on the TV screen for 5 seconds, then the displays
other than the counter disappears. To clear the counter display,
press DISPLAY/OSD.
Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
"– –:– –" may sometimes appear, or the display may blink on
occasion.
33
EN