Table of Contents
Advertisement
A
If the camcorder has no S-VIDEO output connector ...
Recorder
Mini-plug cable
(not supplied)
(JVC camcorder only)
EDIT
Camcorder
To AUDIO/VIDEO
OUT connector
Player
C
If the camcorder has a DV IN/OUT connector ...
Recorder
DV IN/OUT
DV cable (VC-VDV204)
(not supplied)
DV IN/
OUT
Camcorder
EDIT
Player
VIDEO input
1
3
2
PAUSE
connector
AUDIO input
Audio/Video cable
(supplied)
1
3
2
PAUSE
connector
Mini-plug cable
(not supplied)
(JVC camcorder only)
B
If the camcorder has an S-VIDEO output connector ...
Recorder
Mini-plug cable
(not supplied)
(JVC camcorder only)
EDIT
Camcorder
AUDIO OUT
S-VIDEO OUT
Player
NOTES:
About DV IN/OUT connector
To output digital signal when dubbing from the VHS deck to
other device through the DV IN/OUT connector, press
4
and then press PLAY (
To input digital signal when dubbing from other device to
the VHS deck through the DV IN/OUT connector, press
then S-VHS, and then press REC (
VHS deck.
It is possible to control the DV deck from the AVC protocol-
equipped device that is connected to the DV IN/OUT
connector. To control the VHS deck, use the buttons on this
VCR and the Remote.
Dubbing is also possible using the rear panel connectors.
All necessary cables can be obtained from your dealer.
When you select "EDIT" to dub tapes in step 4, be sure to select
"AUTO" (or "NORM" when "VIDEO CALIBRATION" is set to
"OFF") after you finish dubbing the tapes.
When you are editing through the DV IN/OUT connector, the
VCR will stop if the signal is interrupted.
When connecting this VCR to a device equipped with a DV
input connector, be sure to use the optional DV cable
(VC-VDV204).
EN
S-VIDEO input
1
3
2
PAUSE
connector
AUDIO
input
Yellow:
not connected
Audio/video cable
(supplied)
S-Video cable
(supplied)
) to start playback on the VHS deck.
7
) to start recording on the
57
,
- Quick Links:
- Front View
- Specifications
Hide quick links:
Advertisement
Table of Contents
