Edit From A Camcorder - JVC HR-DVS3U Instructions Manual

56
EN
Edit From A
Camcorder
T
1
4
7
1
1 3 2
W
2 3
2
5 6
8 9
0
4
DV S-VHS
You can use a camcorder as the source player and your
VCR as the recording deck.
You can perform digital dubbing if you connect a device
such as a camcorder which has a DV IN/OUT connector.
Because the signals are digital, there is no loss of video or
audio quality as a result of editing.
A
Make connections.
A If the camcorder has no S-VIDEO output connector ...
... connect the camcorder's AUDIO OUT and VIDEO
OUT connectors to the VCR's front panel AUDIO and
VIDEO input connectors.
B If the camcorder has an S-VIDEO output connector ...
... connect the camcorder's AUDIO OUT and
S-VIDEO OUT connectors to the VCR's front panel
AUDIO and S-VIDEO input connectors.
C If the camcorder has a DV IN/OUT connector ...
... connect the camcorder's DV IN/OUT connector to
the VCR's DV IN/OUT connector.
When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your VCR.
When a Master Edit Control-equipped JVC camcorder is used,
the camcorder is capable of controlling the VCR. Refer to the
camcorder's instruction manual for operating procedure.
B
Set the VCR's input mode.
Press AUX (number key "0") and/or CH +/– to select
"F-1".
F-1:when connecting the camcorder to the audio/video
input connectors or DV IN/OUT connector on the front
panel.
When using S VIDEO connector, set "FRONT AUX INPUT" to
"S-VIDEO". ( pg. 73)
When using VIDEO connector, set "FRONT AUX INPUT" to
"VIDEO". ( pg. 73)
C
Select the recording deck.
Press S-VHS or DV.
To edit from a camcorder to the VHS deck through the DV IN/
OUT connector, press
To edit from a camcorder to the DV deck through the S-VIDEO
(VIDEO)/AUDIO input connectors, press
D
Set the edit mode. (VHS deck only)
See "PICTURE CONTROL" on page 73.
E
Start the camcorder.
Engage the Play mode of the camcorder.
F
Start the VCR.
Engage the Record mode of the VCR.
EDITING (cont.)
.
.