JVC HR-DVS3U Instructions Manual page 71

MODE SET
REAR AUX INPUT
8
VIDEO
S-VIDEO
2ND AUDIO RECORD
8
ON
OFF
AUTO TIMER
8
ON
OFF
SUPERIMPOSE
8
ON
OFF
Select the appropriate mode depending on the connector being used on the rear
panel.
VIDEO: To use the VIDEO input connector on the rear panel.
S-VIDEO: To use the S-VIDEO input connector on the rear panel.
When this function is set to "ON";
If a SAP program is received, the SAP audio is recorded on both the normal and Hi-
Fi tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on both the Hi-Fi and
normal tracks.
When this function is set to "OFF", the SAP audio cannot be recorded.
NOTES:
When the channel is changed on the VCR;
The "STEREO" indicator appears on the screen for about 5 seconds if the program is a
stereo broadcast.
The "SAP" indicator appears on the screen for about 5 seconds if the program is a SAP
broadcast.
Both indicators appear when a stereo program is accompanied by SAP sound.
When this function is set to "ON", the timer is automatically engaged when the
VCR power is turned off, and automatically disengaged when the VCR is powered
back on.
NOTE:
For safety, when "AUTO TIMER" is set to "OFF", all other VCR functions are disabled while
the Timer mode is engaged. To disengage the timer, press TIMER.
When this function is set to "ON", various operational indicators appear on the TV
screen. Messages appear in the selected language (
NOTES:
When you use this VCR as the source player for editing, be sure to set "SUPERIMPOSE" to
"OFF" before starting.
During playback, the operation mode indicators may be disturbed depending on the type
of tape being used.
* The default setting is bold in the table below.
pg. 15).
71
EN