Elapsed Recording Time Indication; Tape Remaining Time - JVC HR-J281 Instructions Manual

20
EN

Elapsed Recording Time Indication

1
Display the counter.
Press – –:– – so that a counter reading appears on the TV
screen.
2
Reset the counter.
Press 0000 before starting recording or playback.
The counter is reset to "0:00:00" and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.

Tape Remaining Time

Press – –:– – so that the time remaining on the tape
appears on the TV screen.
NOTE:
Depending on the type of tape used, the tape remaining time
reading may not appear right away, or is not correct. "– –:– –"
may sometimes appear, or the display may blink on occasion.
RECORDING (cont.)