S-Video Connection - JVC HR-DVS3U Instructions Manual

S-VIDEO Connection

ANTENNA IN
ANTENNA OUT
To connect to a TV with S-VIDEO/AUDIO input
8
connectors . . .
A
Connect the VCR to TV.
A Connect the antenna, VCR and TV as per "Basic
Connections" ( pg. 12).
B Connect the VCR's S VIDEO OUT connector to the
TV's S-VIDEO input connector.
C Connect the VCR's AUDIO OUT connectors to the
TV's AUDIO input connectors.
S VIDEO
OUT
S-Video
Cable
(supplied)
RF Cable
(supplied)
To S-VIDEO Input
To 75 ohm Terminal
Antenna or Cable
Coaxial Cable
Flat Feeder
Matching Transformer
(not supplied)
AC Outlet
AUDIO
OUT
Back of VCR
Audio/Video Cable
(supplied)
Yellow:
Not connected
To Audio/Video
Input Connectors
Connector
TV
B
Connect the VCR to power source.
Plug the end of the AC power cord into an AC outlet.
The clock and tuner channels will automatically be set when
the antenna is connected and when the AC power cord is first
connected to an AC outlet (
displayed on the front display panel before the VCR is
powered on, the clock and tuner channels are being set
automatically. Wait for the time to be displayed on the front
display panel before powering on the VCR.)
NOTES:
You can obtain high-quality S-VHS pictures.
To operate the VCR with your TV using the S-VIDEO
connection, set your TV to its AV mode. You can also use the
TV/VCR button on the VCR's Remote to set your TV to the AV
mode. ( pg. 67)
For switching the TV's mode, refer to the instruction manual of
your television.
AC Power Cord
pg. 14). (If "Auto" or "CH" is
13
EN