How To Replace Control Board; Audio Alarm - Elite CSW-200-UL Series Instruction Manual

H O W T O R E P L A C E C O N T R O L B O A R D
Disconnect wire harnesses from OmniControl board. Unscrew 3 nuts and remove board.
When one of the following events happens
an Alarm will Sound!
1 The gate is too heavy or the arm is installed wrong (Refer to page 13).
2
A foreign object is on the gate
frame while the gate is moving.
4 The gate hits the driveway, curb
or other, and gets stuck or bent
in an awkward position.
A U D I O A L A R M
Twice Consecutively,
3
Gate hinges are too tight or
broken and the gate is not
moving freely.
5 The gate is moving and a
vehicle pushes the gate.
Refer to troubleshooting table (Page 36).
31