Clutch Adjustment; Warning Signs - Elite CSW-200-UL Series Instruction Manual

C L U T C H A D J U S T M E N T
Adjust the
Clutch with
a Wrench
The adjustment is for a gate that is over 300 pounds and 12 feet long or longer. While the gate is closing, instantly an
"open" command is given as shown above; the clutch may slip a bit, max. of 1/4 to 3/4 of a turn (slippage depends on the
weight of the gate). If it does not slip, then readjust the clutch.
Installers are required to adhere to this procedure: The UL required Warning Signs must be
installed in plain view and on both sides of each commercial gate installed. Each sign is made
with fastening holes in each corner and should be permanently secured in a suitable manner. Also
the warning sticker should be placed on the operator so it is clearly visible. Installers should keep
photos of signs on gate in their records.
Elite Part # A WS
Gate in Closed Position
Gate is Given an
"Open" Command
Before Completing
a Normal Close-Cycle
Gate Smoothly
Reverses Direction
with the Clutch Slipping
1/4 to 3/4 Turn
Typical Clutch Slippage
(1/4 Turn)
I M P O R T A N T !
Warning Signs Attached on Both Sides of Gate
Warning Sign Clearly Visible on Operator
Gate in
Opened
Position
(Starting Position)
(Finishing Position)
17