Operation; Weighing; Weighing With Tare - KERN GAB-N Operating Instructions Manual

10 Operation

10.1 Weighing

9.9.9.9
0.0
GROSS
ZERO

10.2 Weighing with tare

123
GROSS
(Example)
0.0
NET
- 123.4
NET
ZERO
0.0
GROSS
ZERO
The taring process can be repeated any number of times, e.g. when adding several
components for a mixture (adding). The limit is reached when the whole weighing
range is exhausted.
GAB-N-BA-e-1113
Turn on the scales by pressing the ON/OFF button
underneath the scales on the right.
The balance will carry out a self-test. The balance is ready for
weighing when the weight display „0.0" appears.
When required, the scales can be reset to zero at any time
0
using .
Deposit weighing receptacles
After successful stop check press the
The zero display and the symbol NET will appear.
The weight of the container is now internally saved.
When the weighing container is removed, its weight will be
shown as a negative value.
The taring process can be repeated any number of times,
e.g. when adding several components for a mixture (adding).
The limit is reached when the whole weighing range is
exhausted.
To delete the tare value, remove load from weighing plate
TARE
and press .
TARE
button.
19