Manual Totalizing - KERN GAB-N Operating Instructions Manual

10.6 Manual totalizing

This function is used to add the individual weighing values to the summation memory
and, if a printer is connected to provide a printout when the stability display appear
PRINT
and the key pressed.
ESC
(For details how to set this function see chpt 11 menu)
(Example)
(Example)
(Example)
(Example)
0.0
GROSS
ZERO
24
Place load A
Wait until stability display
PRINT
Press
ESC
ACC 1 followed by the weighing value will appear and the
weighing value will be saved to the summation memory and
possibly printed.
Remove load A
Further loads can only be added after the display has
returned to zero.
Place load B
Wait until stability display appears
PRINT
Press again
ESC
ACC 2, followed by the total weight will be displayed and the
weighing value added to the summation memory and
possibly printed.
Remove load B
Further loads can only be added after the display has
returned to zero.
Add more weighed goods as described before.
Please note that the balance must be unloaded between the
individual weighing procedures.
You can repeat this process until the capacity of the scales is
exhausted.
appears
GAB-N-BA-e-1113