Parts Counting - KERN GAB-N Operating Instructions Manual

10.4 Parts counting

Before the balance can count parts, it must know the average part weight (i.e.
reference). Proceed by putting on a certain number of the parts to be counted. The
balance determines the total weight and divides it by the number of parts (the so-
called reference quantity). Counting is then carried out on the basis of the calculated
average piece weight.
The higher the reference quantity the higher the counting exactness.
0.0
GROSS
ZERO
(Example)
----
GROSS
pcs
10
GROSS
GAB-N-BA-e-1113
Unload scales and set to zero
F
Press and the scales will change to quantity counting
C
mode. Reference quantity of 10, P 10 will appear.
Reference quantities of 10, 20, 50, 100 and 200 can be set
TARE
by pressing .
Place as many items as are required by the reference
quantity
Confirm by pressing
You will briefly see a line on the screen before the scales
show the respective quantity.
To change between reference weight, total weight and
%
quantity, press the
To return to weighing mode, press the
0
key.
F
key.
C
21