Automatic Adding-Up - KERN GAB-N Operating Instructions Manual

10.7 Automatic adding-up

This function is used to automatically add individual weighing values to the
summation memory and to receive a printout from a possibly connected optional
printer.
For details on how to set this function see chpt 11 menu: „ACC on")
0.200
GROSS
(Example)
0.0
GROSS
ZERO
(Example)
0.0
GROSS
ZERO
26
Place load A
After stabilisation control has taken place, you will hear an
audio sound.
The weighing value will be saved to the summation memory.
Remove load A
ACC 1, followed by the weighing value will be displayed and
possibly printed.
Afterwards the weighing scales change to zero display.
Place goods to be weighed B.
After the standstill control sounds a signal tone.
The weighing value is added into the total adding memory.
Remove load B
ACC 2, followed by the total weight will be displayed and
possibly printed.
Afterwards the weighing scales change to zero display.
Add more weighed goods as described before.
Please note that the balance must be unloaded between the
individual weighing procedures.
You can repeat this process until the capacity of the scales is
exhausted.
GAB-N-BA-e-1113