Chapter 2 Access To Ip Camera On Ios And Android Device; Access To Ip Camera On Ios Device; Software Installation; Launch Zmodo Zsight - Kogan KAIPCHDSLVA User Manual

Kaipchdslva

Hide thumbs Also See for KAIPCHDSLVA:

Table of Contents

Chapter 2 Access to IP camera on iOS and Android Device

2.1.1.1 Environmental Requirements

Hardware: iPhone v4.3 up or iPod touch

System: iOS 4.3 or up

2.1.1.2 Installation Steps

Download and install the free Zmodo Zsight software from iTunes App Store or download Zsigh for

iOS from http://www.zmodo.com/support-software/.

Note

1. Open the program called IPCSearch

(Download from http://www.zmodo.com/support-software/)

Click the [Refresh] button on the upper right side of the IPCSearch program. Your IP Camera should

appear in the list of items if your IP Camera is successfully connected to the same router as your PC

is connected to. You can find IP Camera's IP address from IPCSearch (as Figure 3).

Figure 3

2. Before launching Zsight, please make sure that your iOS device is connected to the same Wi-Fi

internet connection that the ZMODO IP Camera is connected to. Also, make sure to enable DHCP

and UPNP on the router that the IP Camera is connected to. Router's wireless authentication

mode cannot be set "WEP Encrypted".

Tap the Zsight icon (as Figure 4 overleaf) from the home screen to open Zmodo Zsight, the device

will automatically enter the "Device List" section (as Figure 5 overleaf).

Table of Contents