OPERATION microSD card Insert a microSD card (not included) gently into the slot on the side edge of camera. Connect power Connect the power to the camera via the Micro USB power adapter.
Page 6
Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To register: Tap to enter registration page.
Page 7
Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (the red indicator light will be flashing rapidly). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing the Reset Pin into the Reset Button on the rear of the camera for 5 seconds until red indicator light begins to flash rapidly.
Page 8
Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™...
MOUNTING THE CAMERA Place or Mount Your Camera You can place your camera on a shelf or other flat surface, or you can secure it to a wall using the 3M adhesive tape supplied. 3M tape...
TROUBLESHOOTING Camera status: Status LED Status Camera Status Red LED on System starting up Red LED blinks quickly Standby for configuration Blue LED blinks quickly Network pairing Blue LED on Camera online Red LED blinks slowly OTA upgrade...
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...