Table of Contents
Advertisement
4.1.3 Wi-Fi Configuration
Double click on the IP Camera that you just saved networking settings on, and click on the "WIFI" tab.
Select the check box to enable Wi-Fi
Next, manually set the IP Addr field, Subnet Mask field, and Gateway field to match the settings
that appear in the Networking tab of the IPC Config menu. Click [Submit] then click [Refresh]. A list of
available Wi-Fi networks will appear in the list.
Double click the name of the Wi-Fi network to enter the "WIFI Wireless Network Settings" menu.
From this menu, enter your Wi-Fi password and click [Establish Connection]
(as Figure 5).
Figure 5
Figure 6
(as Figure 6).
Advertisement
Table of Contents
