Table of Contents
Advertisement
5. Click [Next], enter the default password"111111", and click [Save] to add the devices (as Figure 31).
Now disconnect the network cable and place the camera anywhere within the Wi-Fi signal range.
▲Method Two: Manual Add
1. Click [Discovery], this will take you to the "Discovery" section. Click [Refresh], and your phone will
automatically search all local devices, then click on the 10-digit Device ID (found from the label on the
back body of the IP Camera) to add this camera to Zsight (as Figure 32).
Figure 31
Figure 32
19
Advertisement
Table of Contents
