Table of Contents
Advertisement
2. After either of the above operation, you will enter to "New Device Add Wizard" section (as Figure 16).
[Device by ID] Keep uncheck
[Name] Enter the device name
[Type] Select device type (IPC or NVR)
After the settings are finished, click [Next].
3. System shall automatically identify and add the values of "Port", "Max Channel", "Login" and "Password",
enter device IP, then click [Finish] (as Figure 17).
[IP] Enter device IP (searched by IPCSearch, please check Section 2.1.2 for more information on IPCSearch)
[Max Channel] Quantity of channels of the device
[Login] User name of the device, default is "admin"
[Password] Login password, default is "111111"
Figure 16
Figure 17
37
Advertisement
Table of Contents
