Table of Contents
Advertisement
Figure 26
Figure 27
2.2.3 Device Management
2.2.3.1 Add a Device
The user may add a new IP Camera either by scanning the QR Code on the IP Camera or by
selecting the IP Camera from a list of local network devices.
▲Method One: Scan to Add
1. From the List tab, click the [Add] icon, then tap the QR Code icon to enable the scan mode (as
Figure 28).
Figure 28
2. Aim the highlighted box at the QR Code on the back of your IP Camera, Zsight will automatically
scan and add the IP Camera to the Device List when the QR Code is successfully read.
17
Advertisement
Table of Contents
