Table of Contents
Advertisement
[Motion Detection Setting] After enable motion detection switch, the setting interface will appear
grid line. User only needs to click the little cube on the image to set the motion detection area. Right
click the little cube to cancel related area detection.
[Alarm Action Mode] Set linkage output format after triggered alarm. Sound alarm or sending email
can be selected. Sending email is sending motion detection alarm information via email to user.
[Sensitivity] The sensitivity of motion detection includes four levels: highest, high, medium, and low.
～
[Output Delay] Set delay time of alarm linkage, time range is limited between 0
30s.
After setting all the parameters, click the [Submit] button.
73
Advertisement
Table of Contents
