Specifications & Clearances - Mendota FV44-M Installation & Operating Instructions Manual

MENDOTA FV-44-M GAS DIRECT VENT FIREPLACE INSERT
SPECIFICATIONS & CLEARANCES
18" MIN CLEARANCE
"B"
Minimum Allowable Fireplace Opening:
34" wide X 24" high X 17" Deep
FV-44-M Faceplate Dimensions
No Trim
With Black
or Brass
Trim
The solid-fuel fireplace chimney must be
clean and in good working order and is con-
structed on non-combustible materials
Chimney cleanouts must fit properly.
The refractory, glass doors, screen, and log
"A"
grates can be removed from the solid-fuel
fireplace to accommodate the gas insert.
Smoke shelves, shields, and baffles can be
removed if attached with mechanical fasten-
ers.
Trim panels and surrounds shall not seal
ventilation openings in the fireplace.
WARNING: Failure to position the parts in
accordance with these diagrams or failure to
use only parts specifically approved with this
appliance may result in property damage or
personal injury.
Cutting of any sheet metal parts on the solid-
fuel fireplace is prohibited.
NOTE: Installer must attach the sup-
plied warning label, included in the
instruction packet, to the inside of the
fireplace before installing insert.
10
A
Inches mm. Inches
31 788 44
33 838 48
36 914 52
31 792 44 1/8
1/16
33 843 48 1/8
1/16
36 920 52 1/8
1/16
B
mm.
1118
1220
1321
1122
1224
1326