Specifications & Clearances - Mendota FV-44i Installation & Operating Instructions Manual

MENDOTA FV-44i GAS DIRECT VENT FIREPLACE INSERT
12" MIN-TOP OF VENT SLOT
TO BOTTOM OF MANTEL
23
1/2
COMBUSTIBLE
MANTEL
The solid-fuel fireplace chimney must be clean and in good working order and is constructed on non-
combustible materials
Chimney cleanouts must fit properly.
The refractory, glass doors, screen, and log grates can be removed from the solid-fuel fireplace to accommo-
date the gas insert.
Smoke shelves, shields, and baffles can be removed if attached with mechanical fasteners.
Trim panels and surrounds shall not seal ventilation openings in the fireplace.
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifi-
cally approved with this appliance may result in property damage or personal injury.
Cutting of any sheet metal parts on the solid-fuel fireplace is prohibited.
SPECIFICATIONS & CLEARANCES
34
24
1
2
1/2
8 " MIN. CLEARANCE
COMBUSTIBLE MANTEL
33
1/4
"D" "B"
8" MAX @ 12" ABOVE
HEAT OUTLET
4" VENT PIPE
1/2
1
1/2
14
1/2
3" VENT PIPE
11
1/2
22
1/2
16 " MIN.
NON-COMBUSTIBLE
HEARTH EXTENSION
SIDE VIEW
Minimum Allowable Fireplace Opening:
16
16
1/2
3/8
14
1/2
11
1/2
TOP VIEW
A combustible mantel (or trim) must fall
within the grid area as shown:
TRIM
"A"
"D"
FRONT VIEW
Note: For every additional inch in
mantel depth, distance above top of
vent slot to bottom of mantel must
increase 1 ½"
FV-44i Faceplate Dimensions
No Trim
25
1/4
23
3/4
With Black
or Brass
Trim
4
34" wide X 24" high X 17" Deep
Mantel Depth - Inches
Distance between
top of vent slot to
bottom of Mantel
A
Inches mm. Inches
31 788 44
33 838 48
36 914 52
31 792 44 1/8
1/16
33 843 48 1/8
1/16
36 920 52 1/8
1/16
B
mm.
1118
1220
1321
1122
1224
1326