Advertisement
Maintenance Instructions:
Checking Belt Tension:
If you feel the running belt has occasional pause when you are running, the running belt or
motor belt is probably too loose and you'll need to adjust it.
Judgment methods:
Step 1: Open the motor cover then let the Treadmill work at the slowest speed.
Step 2: Stand on the running belt and move together with it, hang on to the handrails and try
your best to press down and stop the running belt with your feet.
Step 3: If the running belt doesn't stop when you press it, then it's working and adjusted
fine.
If the running belt stops when you press it, but the front roller doesn't stop, then you need to
adjust the belt tension.
If the running belt and front roller stop when pressing down on the belt, then the motor drive
belt is too loose and you'll need to adjust it.
Motor Drive Belt Adjustment method:
Step 1: Remove the power plug from the wall and then remove the motor cover.
Step 2: Loosen the four motor attachment bolts, then adjust the threaded bar with 6# Allen
wrench.
As a quick test, if you can use one hand to twist the motor belt by 120°or more, then the
motor belt is too loose. It should be adjusted tightly. Tighten until you can only twist the belt
by about 60°, then the motor belt is just right.
Step 3: Re-tighten the motor attachment bolts and replace the motor cover.
WARNING
Please make sure to remove the power plug before cleaning or maintaining the
Treadmill.
CLEANING
• General cleaning of the unit will greatly prolong the Treadmill's life.
• Keep the Treadmill clean by dusting regularly.
• Be sure to clean the exposed parts of the deck on either side of the walking belt,
and also the side rails as this reduces the buildup of foreign material underneath
the walking belt.
20
Hide quick links:
Advertisement
