Two Radio Leds - Motorola AP 7161 Installation Manual

20
The top housing LEDs have the following display patterns and functionality:

Two Radio LEDs

A two radio model access point (P/N AP-7161-66040-US and AP-7161-66040-WR) has the following unique LED
behavior:
LED 1
(Sensor) (2.4 GHz)
Not Used Blinking
Emerald
indicates
802.11b/g/n
activity.
Solid Emerald
indicates a radio
is present but
not configured.
WARNING!
LED 2 LED 3
(5 GHz)
Blinking Amber
indicates
802.11a/n
activity.
Solid Amber
indicates a radio
is present but
not configured.
If LED 6 remains blinking Red for longer than 10 minutes, cycle the power to the
unit. If the condition persists, contact the Motorola Solutions support center.
AP 7161 Access Point Installation Guide
LED 4 LED 5
(GE2/WAN) (GE1/LAN)
LED Off LED Off
indicates the indicates the
port is not port is not
connected. connected.
Blinking Green Blinking Green
indicates indicates
normal normal
operation. operation.
Rapidly blinking Rapidly blinking
Yellow Yellow
indicates a port indicates a port
error. error.
LED 6
(System)
Solid Red
indicates
diagnostic mode.
Blinking Red at 1
second interval
indicates POST
failure.
Solid White
following
diagnostic
mode indicates
booting.
Blinking Red and
White at 1
second interval
indicates "no
adoption".
Solid White
indicates normal
operation.