Icom IC-7800 Instruction Manual page 165

■ Miscellaneous (Others) set mode
Selects the speech language from English and Japa-
nese. (default: English)
Selects the speech speed from HIGH (faster) and
LOW (slower). (default: HIGH)
The IC-7800 speech processor has frequency, mode
and signal level announcement. Signal level an-
nouncement can be deactivated if desired.
(default: ON)
When "OFF" is selected, the signal level is not an-
nounced.
Selects the operating mode speech capability when a
mode switch is pushed; ON or OFF.
(default: OFF)
When "ON" is selected, the selected operating mode
is announced when a mode switch is pushed.
Sets the number of memo pad channels available. 5
or 10 memo pads can be set. (default: 5)
Selects the main dial function from MAIN and MAIN/
SUB. (default: MAIN/SUB)
Sets the auto tuning step function for the main dial.
When rotating the main dial rapidly, the tuning step
automatically changes several times as selected.
There are 2 type of auto tuning steps: HIGH (Fastest)
and LOW (Faster). (default: HIGH)
(continued)
• MAIN : The main dial functions only when ac-
cessing to main readout.
• MAIN/SUB : The main dial functions when access-
ing to main readout, as well as when
accessing to sub readout with [SUB]
switch operation.
• HIGH : Approx. 5 times faster when the tuning step
is set to 1 kHz or smaller steps; approx. 2
times faster when the tuning step is set to
5 kHz or larger steps. (default)
• LOW : Approx. 2 times faster.
• OFF : Auto tuning step is turned OFF.
12-17
12
SET MODE