Table of Contents
Advertisement
Option
Composite Out
NTSC_M, NTSC_J, PAL/50 or
PAL/60
Component Out
480i, 480p, 576i, 576p, 720p or
1080i
Component V-Refresh
50 or 60 or 59.94
HDMI Out
-
Setup Audio
Use following steps to display Audio Setup screen on the OSD menu:
1. Navigate to the Unit Setup screen, see Unit Setup screen
2. Press the down arrow button to select Audio Setup .
3. View the details as shown in Figure 3.15 .
Use the Audio Setup screen to set and display the audio output options.
Audio Port
Audio Language
Audio Routing
Audio Attenuation
S/PDIF Mode
www.wegener.com
Possible values
Figure 3.14: Unity 552 OSD Audio Setup
Table 3.8: Audio Output Options
Option
Possible values
1 or 2
A01 or ***
Stereo or Left/Right on both
0 through 20
Passthru, Linear PCM or Off
800089-01 Rev. C
Unity 552 User's Manual
Comments
Selects video output format
Selects video output format. When a DVI/HDMI device
is connected, the mode shall be automatically set to
Slave.
Configures the video/vertical refresh rate
Displays current display mode of the DVI/HDMI device
after EDID negotiation.
on page
May be used for two languages
23.
Comments
25
Advertisement
Table of Contents
