Table of Contents
Advertisement
Operation
Indicator Threshold screen
Use following steps to display the Indicator Threshold screen on the OSD menu:
1. From the Signal Quality Setup screen, ensure that Indicator Thresholds is selected.
2. Press Enter to display the Indicator Threshold screen shown in Figure 3.5 .
3. To navigate the screen, press Enter to highlight the value. Use up or down buttons to
Use the Indicator Threshold screen to set and display the warning condition.
20
Figure 3.7: Unity 552 OSD Signal Quality Setup Screen
set to the desired setting. Press Enter when done. Use left arrow to exit to the
previous menu level.
Figure 3.8: Unity 552 OSD Indicator Threshold Screen
800089-01 Rev. C
www.wegener.com
Advertisement
Table of Contents
