Wegener UNITY 500 Installation & Quick Start Manual

U 500 Q S G
NITY UICK TART UIDE
7. On-Screen Display (OSD)
The information is contained in a
OSD 14-line x 40-character display
This output is viewed on a monitor connected to the video monitor output of the receiver. Turn it on by
pressing either the or push-button on the front panel. Remove the display by selecting
SELECT ENTER
from the . When a menu is first shown, the cursor is always placed on its first
Main Menu
, whichever is first).
with-edit field
The OSD menus provide the following:
1. Carrier Status,
2. Signal Strength Monitoring,
3. Serial Port device selection,
4. Software Version information, and
5. The ability to make changes to unit settings.
All menus are white text with a solid blue background. Highlighted items display as blue text on a white background. The
cursor can be moved only to the action and edit fields listed below. The function of each push button for each field type is
described in Table 5 below.
Table 5: Unity 500 Types of On-Screen Display (ODS) Action Fields
F T SELECT B
IELD YPE
Moves the cursor to the next Action Field (or Action w/
Action Field
Edit Field, whichever is next). Wraps at end.
Same as for Action Field.
Action w/ Edit Field
If the cursor is not on last digit within the Edit Field, it
Edit Field
moves to the next digit. If on the last digit, it moves to
whichever Action Field or Action w/ Edit Field is next.
Edit Field w/ Choices Moves cursor to next Action Field (or Action w/ Edit
Field, whichever is next).
8. Viewing and Customizing the Unity 500's Settings
Although the is set up at the factory, you can customize its settings to fit your system using the
Unity 500
and front-panel push buttons. You may also view the existing settings and the various status and version
fields by using the push buttons to navigate through the menus displayed on an attached monitor.
9 Warranty
The following warranty applies to all Wegener Communications products:
All Wegener Communications products are warranted against defective materials and workmanship for
a period of one year after shipment to customer.
warranty is limited to repairing or, at
Wegener Communications
or entire assemblies.
Wegener Communications
consequential damages. This warranty does not cover parts or equipment, which have been subject to
misuse, negligence, or accident by the customer during use. All shipping costs for warranty repairs
shall be prepaid by the customer. There are no other warranties, express or implied, except as stated
herein.
10. Technical Support
In the event that the unit fails to perform as described, contact
at (770) 814-4057, FAX (678) 624-
Communications Customer Service
0294, or E-mail "service@wegener.com".
Corporate Office Service Department
Wegener Communications, Inc. Wegener Customer Service
11350 Technology Circle 359 Curie Drive
Duluth, GA 30097 Alpharetta, GA 30005
800010 Rev. B (Printed in USA)
in the video output from the
U500
action field
ENTER B
UTTON UTTON
Takes action on the current field.
Moves cursor to corresponding Edit Field.
Increments current digit within Edit Field.
Wraps back to beginning after 9.
Scrolls through list of choices. Wraps back
to beginning after the last item.
' obligation under this
Wegener Communications
' option, replacing parts, subassemblies,
shall not be liable for any special, indirect, or
Wegener
4 www.wegener.com
receiver.
EXIT
(or
action-
The
UNITY 500
1. Unpacking and Inspection
The box containing the unit should include:
•
The
• This one-page
Carefully unpack the unit and the ac power cord and inspect for obvious signs of physical damage that might
have occurred during shipment. Any damage claims must be reported to the carrier immediately. Be sure to
check the package contents carefully for important documents and materials.
Save the original packing materials and shipping containers in case the unit must be returned for repair.
NOTE:
Packing the unit in another container in such a way that the unit is damaged will void the warranty.
2. Environmental Operating Conditions and Physical Specifications
OSD
Use
Altitude
Temperature Range
Relative Humidity (max.)
Weight
Dimensions (H x W x D)
Input Power Rating
3 Location and Mounting
The is sized at 1.5 RU, and may be mounted in a standard 19-inch equipment rack or set up for desktop
U500
operation. In either location, maintain a clean, dry environment for the
3.1. Rack Mounting
First install angle brackets or cross-supports capable of supporting both the unit and its connecting
cables. Screw or bolt the supports securely to the equipment rack. The
such a way that a hazardous condition is not produced by uneven loading, or by resting any
unsupported equipment on a rack-mounted
Place the U500 on its supports and use four anchor screws or bolts and nuts to secure the U500 front
brackets to the rack.
The front brackets must be secured to the rack. If the front brackets are left unsecured, the unit may shift
NOTE:
forward and fall from the rack, and may result in personal injury and/or damage to the equipment.
www.wegener.com
U 500
NITY
E M R
NTERPRISE EDIA
I Q S
NSTALLATION UICK TART
is a digital satellite receiver that will receive signals from both
•
A UL Safety Sheet
Unity 500 Satellite Receiver
• An AC Power cord
Quick Start Guide
Table 1: Unity 500 Environmental Limits and Physical Specifications
I /L
TEM IMIT
Indoor
Up to 2000 meters
10 o C to 40 o C
80% for temperatures up to 31o C decreasing linearly to 50% relative
humidity as 40o C.
10.6 pounds or 4.81 kilograms
3.5"x 19"x 10.5" or 88.9 mm x 482.6 mm x 266.7 mm
90-132Vac & 175-264Vac, 43 Watt, 50/60 Hz
unit.
U500
1
ECEIVER
G
UIDE
and band satellite systems.
C Ku
S
PECIFICATION
.
U500
unit should be installed in
U500
800010 Rev. B (Printed in USA)