Table of Contents
Advertisement
Errored Secs per Min
Signal Strength Meter screen
Use following steps to display Signal Strength Meter screen on the OSD menu:
1. Press any push-button on the front-panel to display the Main Menu .
2. Press the down arrow button to select Carrier Settings .
3. Press Enter .
4. Press the down arrow button to select Signal Strength Meter .
5. Press Enter to view the screen as shown in Figure 3.9 .
Set Subtitling
Sub-titling Setup screen
options
Use following steps to display Sub-titling Setup screen on the OSD menu:
1. Press any push-button on the front-panel to display the Main Menu .
2. Press the down arrow button to select Subtitling Setup .
3. Press Enter .
4. View the details as shown in Figure 3.10 .
www.wegener.com
Table 3.5: Indicator Threshold screen options
Option
Possible values
10 to 19
Figure 3.9: Unity 552 OSD Signal Strength Meter Screen
800089-01 Rev. C
Unity 552 User's Manual
Comments
Set the threshold for how many errors per
minutes before raising a warning condition.
21
Advertisement
Table of Contents
