Table of Contents
Advertisement
Operation
Push-buttons
Use the arrow buttons and Enter on the front panel to navigate and edit the fields on LCD
and OSD menus. Any of the push buttons activate OSD and LCD. The arrow buttons are
used to navigate through menus and to either change or display items to set desired options
for the IRD. The Enter button is generally used to select menu items on LCD and OSD
menus. Selectable fields allow you to change the whole parameter from pre-determined
options. Editable fields allow you to change each digit of the parameter. Once a field is
updated, you must select Activate and Exit on the submenu and then press Enter to update
the value of the field. Before pressing Enter , you may go back to any field and correct it prior
to acceptance. The left arrow button usually steps back a menu.
Button
Enter
right arrow
left arrow
up arrow
down arrow
LED
Upon power up, the IRD initializes all system components and supplies an operational
status. A steady Green LED indicates that it is locked on a carrier and is capable of
producing output (Audio/Video/Data).
In case of problems, the LED flashes Red for alarm conditions or Amber for warning
conditions. In general, alarms indicate that the unit cannot produce output, while Warnings
14
Figure 3.2: OSD Main Menu
Table 3.1: Menu Navigation using Push-buttons
Main Menu
selects submenu or
goes to editable field
drop-down list
no action
no action
exits OSD
goes to previous menu
level
goes to next or
goes to next or previous
previous menu item
menu item
goes to next or
goes to next or previous
previous menu item
menu item
800089-01 Rev. C
Actions
Submenu
Edit Mode
accepts changes
moves cursor to right
moves cursor to left or
abandon changes
increases value of selected
item
decreases value of selected
item
www.wegener.com
Advertisement
Table of Contents
