Table of Contents
Advertisement
Use the LNB Setup screen to set and display the LNB configuration.
LNB Type
LO Type
LO Custom Freq.
Monitor
Signal Quality Setup screen
Signal
Use following steps to display Signal Quality Setup screen on the OSD menu:
Quality
1. Press any push-button on the front-panel to display the Main Menu .
2. Press the down arrow button to select Carrier Settings .
3. Press Enter .
4. Press the down arrow button to select Signal Quality Setup .
5. Press Enter to display the Signal Quality Setup screen shown in Figure 3.7 .
www.wegener.com
Figure 3.6: Unity 552 OSD LNB Setup Screen
Table 3.4: LNB configuration options
Option
Possible values
Local Oscillator or Universal/ASTRA
Custom Freq., Std C-band, US Ku-
band, Euro Low Ku-band or Euro Hi
Ku-band
800089-01 Rev. C
Unity 552 User's Manual
Comments
Only Local Osc option allows
other options to be set.
Only Custom Freq. option
allows other options to be set.
19
Advertisement
Table of Contents
