Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Installation Quick Start Guide
General Information
The Wegener
satellite systems. Additional information may be found on the Wegener web site at: www.wegener.com.
Unpacking and Inspection
The box containing the unit should include:
Carefully unpack the unit and the ac power cord and inspect for obvious signs of physical damage that
might have occurred during shipment. Any damage claims must be reported to the carrier immediately.
Be sure to check the package contents carefully for important documents and materials.
Save the original packing materials and shipping containers in case the unit must be returned
NOTE:
for repair. Packing the unit in another container in such a way that the unit is damaged will void
the warranty.
Environmental Operating Conditions and Physical Specifications
The table below lists the
Item/Limit
Use
Altitude
Temperature Range
Relative Humidity (max.)
Weight
Dimensions (H x W x D)
Input Power Rating for Unity 550 12VDC 5.0A
Input Power Rating for inline
power supply
www.wegener.com
Unity 550
Enterprise Media Receiver
is a digital satellite receiver that will receive signals from both
Unity 550
the Unity 550 Media Receiver
this Quick Start Guide
the Li Shin International Enterprise Corp. inline
power supply / Model: 0218B1260
Environmental Limits and Physical Specifications
Unity 550
Indoor
Up to 2000 meters
o
10
C to 40
80% for temperatures up to 31
humidity at 40
6.8 pounds or 3.0844 kilograms
1.75"x 16.5"x 11" or 44.45 mm x 419.1 mm x 279.4 mm
100-240VAC, 50/60Hz, 1.5A
Specification
o
C
o
C decreasing linearly to 50% relative
o
C
800072-02B
and
C
Ku
a UL Safety Sheet
a power cord
band
1
Advertisement
Table of Contents
Related Manuals for Wegener UNITY 550
Summary of Contents for Wegener UNITY 550
-
Page 1: General Information
Unity 550 Enterprise Media Receiver Installation Quick Start Guide General Information The Wegener is a digital satellite receiver that will receive signals from both band Unity 550 satellite systems. Additional information may be found on the Wegener web site at: www.wegener.com. Unpacking and Inspection The box containing the unit should include: the Unity 550 Media Receiver... -
Page 2: Location And Mounting
UICK TART UIDE Location and Mounting is sized at 1RU, and may be mounted in a standard 19-inch equipment rack or set up for Unity 550 desktop operation. In either location, maintain a clean, dry environment for the Unity 550 Rack Mounting unit should be installed in such a way that a half-inch clearance is allowed on each side Unity 550... -
Page 3: Rear Panel Connections
UICK TART UIDE Rear Panel Connections shows the rear panel connections of the that are described in Figure 1 Unity 550 Figure 1 rear panel view Figure 1: Unity 550 Interconnect Descriptions Table 1: Unity 550 Signal Connector Description RF Switch IN - Port 1 950 to 2150 MHz signal accepted. -
Page 4: Lcd Menu Navigation
UICK TART UIDE Front Panel Controls Table 2: Unity 550 Item Description Activates automatically by certain status conditions, such as loss of signal. To manually activate, press the ENTER button. Arrow buttons Push buttons activates LCD and selects options displayed. ENTER Push button enters options selected on LCD. - Page 5 UICK TART UIDE LED Indications after Power-Up Within approximately 15 seconds of power up, the IRD gives an indication of stable operation. It initializes all system components and supplies an operational status. A steady Green LED indicates that it is locked on a carrier and is capable of producing output (Audio/Video/Data). If there is some problem with the IRD or the signal it is receiving the LED flashes for alarm conditions or...
-
Page 6: Signal Strength
UICK TART UIDE OSD Menus All menus are white text with a solid black background. Highlighted items display as black text on a white background. is a representation of the Main Menu. Figure 3 OSD Main Menu Figure 3: MAIN MENU Carrier Status Carrier Select Software Version/ Serial No. -
Page 7: Warranty
Wegener Communications All Wegener Communications products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Wegener Communications' obligation under this warranty is limited to repairing or, at Wegener Communications' option, replacing parts, subassemblies, or entire assemblies.