Web Ui; How To Upgrade Firmware - Korenix JetI/O 6510 User Manual

4.5

Web UI

Type the IP address of the device. Then you can access the embedded web browser of
the I/O server. The web browser allows you monitor the information/status of each
channels.
4.6

How to Upgrade Firmware

The JetI/O server allows you remotely upgrade the firmware to fix the known issues or to
enhance the software features. When user starts the progress of the firmware upgrade,
the JetI/O runs as the DHCP client mode to get the IP from DHCP Server and download
the boot file from the server. (Not the same as JetNet or other product.)
For JetI/O firmware upgrading utility, we recommend the freeware utility, TFTP32. You can
easily download the tool in the web site:
1. Download the file and run it first.
2. Browse the "Current Directory" of the firmware file you put. And select the network
interface card you used.
3. Configure the setting in the "DHCP Server" mode.
a. Type the start IP address in the "IP pool starting address".
b. Type the volume for the Size of the pool. The volume is the IP address the
DHCP Server can assign to the clients.
c. Boot File: Type the file name you want update.
d. Mask: Type the subnet mask here.
e. The other settings are optional, depend on your environment.
f. After configured, press "Save" to save the settings.
4. Open the Device Finder Utility and search the available JetI/O servers. Select the
http://tftpd32.jounin.net/
21